TY - JOUR AU - Ochi, Hiroaki AU - Kino, Hitoshi AU - Tahara, Kenji AU - Matsutani, Yuki PY - 2020 DA - 2020/03/30 TI - Geometric conditions of a two-link-and-six muscle structure based on internal force stability JO - ROBOMECH Journal SP - 17 VL - 7 IS - 1 AB - In a musculoskeletal system, internal tensile forces are generated among the muscles because it is a redundant system. The balancing of the internal tensile forces for a given posture generates a potential field in the system. Therefore, the potential field is utilized for the sensorless feedforward position control and improvement of stability based on the feedback method. However, the stability of the internal tensile forces is strongly influenced by the muscular arrangement. Previous studies showed that a stable condition can be identified through the minimization of the potential at a desired posture, and the sufficient condition has been theoretically established; however, the geometric condition of the muscular arrangement has not been determined. To effectively exploit the characteristics of the internal tensile forces, the geometric condition must be elucidated in the design of a musculoskeletal system. This paper aims to clarify the geometric condition to generate stable internal tensile forces. Based on the conditions generating the potential that is minimum at the desired posture, the paper analyzes that the geometric condition on a musculoskeletal structure with two-link and six-muscle. Additionally, the identified condition is assessed based on simulations. As a result, we revealed the geometric condition of the muscular arrangement to generate stable internal tensile forces. By designing the muscular arrangement to satisfy the condition, the stability of the internal tensile forces is ensured, and consequently, a control method utilizing the characteristics of the internal tensile force is stably implemented. SN - 2197-4225 UR - https://doi.org/10.1186/s40648-020-00164-3 DO - 10.1186/s40648-020-00164-3 ID - Ochi2020 ER -